Vin Got SCAMMED. 402,000 Mile Porsche 911 Hot Rod Build!

396 949 Näkymät

It happened: the king of buying, selling, and trading cars got played. If you play the game long enough, it’s bound to happen. What was originally advertised as a 102k 911, turned out to be a 400,000+ mile 911. Oddly enough… we’re even more into it now.
This project is made possible from parts and DIY articles from Pelican Parts! Need parts? Bought an old Porsche and have no idea what you're doing? Hit Pelican!
@Pelican Parts
Want this exhaust? @Supersprint Exhausts
Thanks to @ECS Tuning for the quick shipping!
Thanks to Thermo-tec:
We’ve got channels for all your car content needs. Subscribe, nerds.
The Hoonigans:
Project Cars:
Daily Transmission:
Ken Block:
Stay fresh with the latest apparel:
Follow Our Crew:
And don’t forget to turn on notifications so you don’t miss out on our latest uploads!

  • Has anyone EVER had an EZ out work? I highly doubt it.

    Eric RobisonEric RobisonTunti sitten
  • Vins over here looking like and extra from no mans land 😂

    Almost A BoomerAlmost A Boomer10 tuntia sitten
  • Shoulda kept welding once u get it down past that first thread they usually come out fairly easy I have to do that a few times a week

    John KoskyJohn Kosky3 päivää sitten
  • dam i hate those oil hose clamp ! spring loaded clamp is way better ( big rig seller usually sell those)

    appr ovedappr oved4 päivää sitten
  • sorry if i am later ! better late then never

    appr ovedappr oved5 päivää sitten
  • Both my car's front CV axles tore the boots and flung grease everywhere inside my engine bay. It's a royal mess in there. F

    JPJP6 päivää sitten
  • Good.

  • You call that rust? I've poked holes through fenders with my pointer finger. I've had subframes disintegrate and snap. Ask Fitment Industries about RUST

    Jesse RennJesse Renn6 päivää sitten
  • Thank you for giving me more reasons to love my Corolla. Fuck this nightmare.

    Jesse RennJesse Renn6 päivää sitten
  • I’m waiting for a vin wiki story

    Cameron HaverfieldCameron Haverfield7 päivää sitten
  • Here's another DIY tip to get seized bolts out I went to diesel school for 2 years and my instructor showed me a trick while I was in there if you go and get paraffin wax they use it in Canning food you can usually find it at Walmart but heat up the bolt put the paraffin wax on it and the Heat drawers the paraffin wax around the threads and breaks it loose

    Cody GrayCody Gray9 päivää sitten
  • we have bigger chanellocks xd super usefull to squeeze brakecalipers

    Maxime VhwMaxime Vhw10 päivää sitten
  • Honestly though, I'm glad you guys ended up with a 400,000. Watching you pull out those drain tubes was so satisfying to watch knowing there's nothing but gains while cleaning this.

    Jacob MobleyJacob Mobley11 päivää sitten
  • That sounds sooo good

    alireza bayatalireza bayat11 päivää sitten
  • Cleaning the engine on the road and just letting the oil run onto the road is the worst thing I've seen in a long time. Environmental protection is not known to you?

    Standert NamesStandert Names13 päivää sitten
  • did yall at least clean the rust off the bolt when you welded to it? ive done that countless times at the shop i use to work at and it always worked, honestly looks like you didnt clean the rust off first.

    eXQUiZiTMiMeeXQUiZiTMiMe13 päivää sitten
  • Are they not called push rod tubes?

    Glenn PorteousGlenn Porteous13 päivää sitten
  • When it comes to buying a car for me miles mean nothing ive seen lady's come in for the first oil change at 30k because there husband says thats when its due or in your case odometer rolled back or swapped a million other scenarios

    david Danielsdavid Daniels13 päivää sitten
  • First mistake removing rusted fasteners is using 12 point sockets...

    Cole CorbinCole Corbin13 päivää sitten
  • Did you tell Porsche about this? Maybe they could help you guys. A few years ago you could give back a Mercedes with 1 Mio km and got a new one.

    Henning PfenningHenning Pfenning15 päivää sitten
  • wowowow, wtf that guy doing welding with open exaust next to it??? and you won't weld a nikeled nut onto a rusty bolt... noobs

    H5N1H5N115 päivää sitten
  • The fact that they use rigid power tools in the shop has me worried

    Justin DavisJustin Davis15 päivää sitten
  • points at pristine exhaust bolts and calls them rusty. i want to live in CA so bad lol

    Mike BresnahanMike Bresnahan16 päivää sitten
  • Drain tubes... 3 hose claps, one on each side and the third goes between the other two. Tighten first two then tighten the third kinda like a reverse jack screw

    Ryan SchiebleRyan Schieble16 päivää sitten
  • I have a 1989 Porsche with 368,000 miles on it. Original engine that has only had the head rebuilt. I don’t really drive it much anymore because 175hp really isn’t that much fun lol

    CrazyDuckCrazyDuck17 päivää sitten

    VDuro1VDuro118 päivää sitten
  • 3.6r swap dawg. ill tune it if you want ..............i need practice.

    Lorin SabinLorin Sabin18 päivää sitten
  • wizzy wheel in two

    MI T YTMI T YT19 päivää sitten
  • Scotto is life

    Matthew KestersonMatthew Kesterson19 päivää sitten
  • Harbor freight comes through with left handed titanium $5 throw away drill bits rather then extractors Definitely like it more with 400k I had a Jeep Cherokee sport two door that had 468k on the original 4.0 , I literally changed everything copper and rubber on the Jeep and ended up selling it after beating the heck out of it for 3 years like normal lol , Seen the dude 6 years later with my Jeep with like 30 sheets of plywood on the roof 😂, knew it was mine due to body work

    Ray Raz ReptileRay Raz Reptile19 päivää sitten
  • Tighten.. then loosen... you'll break substantially less bolts..

    James BondJames Bond20 päivää sitten
  • You should race it against the hoonicorn ,another pointless match up.

    MrGarycowwMrGarycoww20 päivää sitten
  • 10,000 miles a year, in a Porsche. I thought rolling back odometer was a felony in CA.

    Baron of Livonia.Baron of Livonia.21 päivä sitten
  • Can’t have loud cars that only make 200hp...... -me and my 91 v6 camaro with a huge exhaust leak- well yea, i agree with you vin :/ lol

    CameronCameron21 päivä sitten
  • I realy like the thermo tech sleeve. I have always liked keeping a i.c.e. cooler for some reason.

    Zeffrey DoolittleZeffrey Doolittle22 päivää sitten
  • Buddy you run a shop. I don’t understand why you don’t have a legit car lift in there. It would easier to work on your projects. I hope it’s on your to do list for 2021, but all in a nice video. Thanks.

    Lou PrimoLou Primo24 päivää sitten
  • I am the Porsche mechanic you ask for... and yea.. that’s how we’d do the oil tubes in the dealer 😅

    Katie MohlerKatie Mohler26 päivää sitten
  • Weld the holes on the rear bumper paint it white and call it a day.

    Joe KnowskiJoe Knowski27 päivää sitten
  • Vin: "Can't have a car that loud that makes only 200 hp" Me/Half the fans: 👁👄👁

    Vic 97Vic 9729 päivää sitten
  • Lock the vice grips on and hit them with an air hammer 😁

    HudsonHudson29 päivää sitten
  • 402,000 miles, that’s bragging rights as is.

    Rebel Oakley : Kustom DesignsRebel Oakley : Kustom DesignsUukausi sitten
  • how do you not have pb at your shop?? lol

    Mitch MacMitch MacUukausi sitten
  • Suppy from lm24?

    jdmspugjdmspugUukausi sitten
  • scam? nah you turn out great you did your check it turned out good for you , push it to half a mill miles do it ... now the car got character, and the thing is you guys fix your stuff...

    Zeus .EdwardsZeus .EdwardsUukausi sitten
  • never use a 12 point on a bolt/nut 6 point rounding very likely and hammer the closest wrong size on rusty header bolts so all have semi cheap sockets to beat on

    overbuilt automotiveoverbuilt automotiveUukausi sitten
  • bro ... u need the rite tools to work on german cars :D

    Sebastian LeisterSebastian LeisterUukausi sitten
  • half a million?!?! sounds like these guys never drove a 'yota. pretty sure half a mil is the calling card for the first oil change. (YES! i know Vin has/had a 4runner.)

    Egor ShwiesterEgor ShwiesterUukausi sitten
  • Like 10 ads this video

    Trapgod NahTrapgod NahUukausi sitten
  • What's this guys pay grade that he can afford a 911??

    baby yoda partakebaby yoda partakeUukausi sitten
  • 19:06 insert cod multiplayer “throwing smoke” sound effect

    J A Y D E EJ A Y D E EUukausi sitten
  • Whale tail ill take it. I cry in my soul everytime i see a 911.... Vin hold on to her make it yours and keep up inspiring us surfs wishing wr could drive something as majestic.

    Mr InvisibleMr InvisibleUukausi sitten
  • Holy fuckn ads

    JmelgarJmelgarUukausi sitten
  • Man doesn’t know what a rusty bolt is. He was saying the ones on the muffler was rusty. That’s nothin compared to my Jeep where the bolts are falling apart

    Shawn SquiresShawn SquiresUukausi sitten
  • “oil drain tubes” you mean push rod tubes...

    Duncan AllenDuncan AllenUukausi sitten
  • BROOO I WAS GOING TO BUY IT FOR $42K on craigs list and you bought it about 3 months ago

    Jesus JesusJesus JesusUukausi sitten
    • Yeah on Craigslist a couple months ago

      Jesus JesusJesus JesusUukausi sitten
    • come on, that was 42K??

      scaduchscaduchUukausi sitten
  • kingvon

    light werehoglight werehogUukausi sitten
  • In the makings of the highest milage porsche ever. That's gotta be something lol.

    Divine DriftDivine DriftUukausi sitten
  • even better now that you know it has so many miles

    jose escamillajose escamillaUukausi sitten
  • Its not rusty unless you cant lay under it for fear of rust in your eyes

    ZoogleBoogleZoogleBoogleUukausi sitten
  • Rwb it

    Christian AlvarezChristian AlvarezUukausi sitten
  • Take the cluster out and just take the back plate up and just spin it by hand don’t ask how I know worked at (foreigncarsitallia) Car dealers are crooks 🤣🤣..

    Tiitan RutseTiitan RutseUukausi sitten
  • Another rusty bolt story..........

    your daddyyour daddyUukausi sitten
  • That is definitely not that rusty come to Illinois we can show you some rust.

    danrid1982danrid1982Uukausi sitten
  • Its crazy how many car guys use PB instead of KROIL...

    Zapsurf 13Zapsurf 13Uukausi sitten
  • Don't hate the car, hate the channel locks.

    ChrisChrisUukausi sitten
  • Committing felonies trying to get the car back to stock lol

    Aaron M.Aaron M.Uukausi sitten
  • Sooooo I'm not the only person that does the "foot jack" floor jack method?!?!😂🤣😂

    Weinmiller14Weinmiller14Uukausi sitten
  • Just subbed. Great Content, Great Edits, & Great Info 🔥

    Andrick ArchundiaAndrick ArchundiaUukausi sitten
  • 13:00 instead of using the clamps like that, could you like, twist the two vice grips you had on the tubes to break their seals loose?

    Kas bKas bUukausi sitten
  • So sorry about that..... I'll advise you to contact cailyfunds on instagram for you reliable money refund. He helped me recover my $2,900 from some scammers. You can thank me later.

    Ayomide OgundiranAyomide OgundiranUukausi sitten
  • It’s okay my Nissan Hardbody has 437k miles ftw!

    D21 JayD21 JayUukausi sitten
  • “Makes a bunch more of power” on a 402k engine 😂😭

    Ollie HigtonOllie HigtonUukausi sitten
  • Er, just remove push rod and cut off the old push rod tube with some tin snips?! 😳

    Martin HardcastleMartin HardcastleUukausi sitten
    • Porsche engines don't have push rods. They're OHC engines. Those are the drain tubes from the head back into the case.

      Kas bKas bUukausi sitten
  • Vin: u can’t have a car that loud with 200hp 350z owners

    gopro shredditsgopro shredditsUukausi sitten
  • This is the reason I hate working on cars in my older age. I have set aside one day to work on my daily driver shit box and spend the next 3 days replacing stupid ass shit that broke when trying to fix something unrelated!

    Brian GroganBrian GroganUukausi sitten
  • That thing sounds spicy with that exhaust!

    Josiah HeinJosiah HeinUukausi sitten
  • I never used an easy out as a drill bit 🤔

    popomomo12popomomo12Uukausi sitten
  • Lamo insanely tight. Wait until you get those hex heads stuck on a subaru cam

    popomomo12popomomo12Uukausi sitten
  • lol super rusty.... you're in california. come to canada and check out real rust

    Jesse WarrenJesse WarrenUukausi sitten
  • I like to drill out with left hand bits... sometimes you get lucky and the bit grabs and spins your broken bolt out.

    thelloyd87thelloyd87Uukausi sitten
  • 3:48 "super rusty" lmao, yeah right. Those look immaculate compared to what we get in the rust belt

    Kevin CollinsKevin CollinsUukausi sitten
  • 13:00 let me help you guys out, they are called C-Clamps. C-CLAMP. any size. you don't need 2 burly men just a little clamp, lol.

    NecrodeadNecrodeadUukausi sitten
  • Where is the Duramax camaro?

    Richard MarkleRichard MarkleUukausi sitten
  • Definitely need to buy some rbrt mac Allen sockets. Pretty much the best Allen or torx ever they don't slip they just dig in harder. Replace bolt afterwards.

    Jeremy PikeJeremy PikeUukausi sitten
  • Cut a chunk out of the longer side, then wiggle the halves out. Badda boom.

    Raymond JohnsonRaymond JohnsonUukausi sitten
  • Note to Vin: don’t use easy out as a drill bit. 👍🏼👍🏼

    Monday MondayMonday MondayUukausi sitten
  • Work hardened stud is no bueno.

    GY NATGY NATUukausi sitten
  • Rusty bolts? Ask Scotto, he knows a stuff or two...😄😄😄😜

    UncleManuelUncleManuelUukausi sitten
  • what brand glasses is he wearing

    Jesus GutierrezJesus GutierrezUukausi sitten
  • Cool vise grips and pipe pliers....I'm not impressed. Sorry for your frustration.....

    77 Zrod77 ZrodUukausi sitten
  • If a 12 won't fit and the 13 is loose, use a 1/2.

    Juan TobiasJuan TobiasUukausi sitten
  • If you have all this info, and it is accurate. Isn't it illegal and sueable and your right to fight this crap???? Especially in CALIFORNIA were the rest of us suffer from your state crappy vehicle laws!!!!!!!!!

    77 Zrod77 ZrodUukausi sitten
  • That car is still awesome with 400k on her.

    Arty's MotorsportsArty's MotorsportsUukausi sitten
  • Scotto:"I like this thing more now, that it has a story" Vin: *wallowing in regret* Ahhh Carcain for ya

    Pops DaddyPops DaddyUukausi sitten
  • Got to rock exhaust bolts loosen little then tighten and it will slowly come out I've done that for years and have never broken a manifold bolt or used heat

    4 spd life4 spd lifeUukausi sitten
  • Fix it with 🔥 !!! Porsche actually sells a tool for those tubes but it costs 12k.... 🤣🤣 no not really but probably because Porsche

    Nick WNick WUukausi sitten
  • Every time I watch one of you guys work on your cars you make me less miserable about my shit box e46

    R35PECTR35PECTUukausi sitten
  • At 20:46 love the white fj60 land cruser who owns it??

    Alan MoisesAlan MoisesUukausi sitten
  • Come to the North East rust belt ... I'll show you a Bad Time.

    negativejeffnegativejeffUukausi sitten
  • anyone who has been around cars knows the smell of oil and dirt from underneath a car haha

    Brandon LynnBrandon LynnUukausi sitten